D&M Appliance, Heating, and Air-Conditioning Inc. - Logo
 334.749.7211
Toll Free 866.999.0503
Licensed*Bonded*Insured
Alabama HVAC #95184
Alabama REFR #50793
Locally Owned And Operated
Proudly Serving The Auburn/Opelika And Surrounding Areas For Over 26 Years

 "Wouldn't You Like To Receive A Free Preventive Maintenance Service For The Winter....
Call Our Office Today And Ask One Of Our Friendly Associates How You
Can Receive A Free Preventive Maintenance Service!"
Click Here To Call Today To Find Out How You Can Receive A Free Preventive Maintenance Service

PREVENTATIVE MAINTENANCE

Preventive Maintenance Contracts
You wouldn't drive your car 100,000 miles without changing the oil now would you? The same logic is true for your heating and air-conditioning system. Regular preventative maintenance is the best way to ensure trouble-free operation and peak performance even in the harshest weather.
 
D&M offers three levels of preventative maintenance contracts so that you have the ability to choose the level of service that will fit your home needs and budget. Whether your home has one or more central heating and air-conditioning systems, we have the preventative maintenance plan to ensure they are operating at peak performance and providing you and your family with a comfortable and efficient living environment.
 
Each of our preventative maintenance service plans offer twice-a-year system inspection, filter replacement at the time of service, part and labor warranties, and priority and emergency services. Call our friendly office staff today to discuss your options to see which level suits your needs in the best way.

Fall PM Service Special

Fall PM Service Only $79.95
One System Fall Preventive Maintenance Special...Only $79.95
This coupon is for a single service only for one heating system. This coupon may not be combined with any other offers. This coupon may be used once per household. This offer expires December 31st, 2017.
Click To Use Coupon
Share
EXPIRED

      Heat Pump System Checklist

  • Inspect evaporator coil, drain pan, and condensate drain lines
  • Clean or replace filters
  • Inspect ductwork and check for leaks
  • Monitor system starting characteristics and capabilities
  • Listen for abnormal noise
  • Search for unusual odors
  • Measure high and low side system pressure
  • Measure temperature rise and adjust airflow as needed
  • Monitor system for correct line and load volts/amps
  • Inspect control box, associated controls, wiring, and connection
  • Inspect unit for proper refrigerant level
  • Clean dirt, leaves, and debris from inside cabinet
  • Inspect base pan for restricted drain openings; remove obstructions as necessary
  • Inspect condenser coil and cabinet - clean as needed
  • Inspect fan motor and fan blade for wear and damage
  • Inspect compressor
  • Inspect control box, associated controls, accessories, wiring, and connections, including connectors, relays, circuit boards, and capacitors
  • Check thermostat operation
  • Check refrigerant levels

         Gas System Checklist

  • Inspect evaporator coil, drain pan, and condensate drain lines
  • Combustion blower for debris and lint
  • Clean combustion blower if necessary
  • Inspect for gas leaks in furnace
  • Check operation of carbon monoxide detector
  • Inspect burner assembly
  • Inspect ignition system and safety controls
  • Inspect heat exchanger
  • Inspect flue system
  • Clean or replace filters
  • Inspect ductwork and check for leaks
  • Monitor system starting characteristics and capabilities
  • Listen for abnormal noise
  • Search for unusual odors
  • Measure high and low side system pressure
  • Monitor gas furnace for correct line and manifold gas pressure
  • Measure temperature rise and adjust airflow as needed
  • Check vent system for proper ventilation
  • Monitor system for correct line and load volts/amps
  • Inspect control box, associated controls, wiring, and connection
  • Inspect unit for proper refrigerant level
  • Clean dirt, leaves, and debris from inside cabinet
  • Inspect base pan for restricted drain openings; remove obstructions as necessary
  • Inspect condenser coil and cabinet - clean as needed
  • Inspect fan motor and fan blade for wear and damage
  • Inspect compressor
  • Inspect control box, associated controls, accessories, wiring, and connections, including connectors, relays, circuit boards, and capacitors
  • Check thermostat operation
  • Check refrigerant levels
Share by: